Home Page |
|
Contact us |
![]() ![]() |
|
|
|
Video System: PAL fully compatible with
Australian TV System.
Image Device: 537 (H) x 597 (V) 320 589 Pixel
1/3" LOW BLEMISH Sharp CCD Image Sensor.
Lens: Pinhole Type 5.5 mm Focal Length, there are no
Accessory Lenses for this Camera,
additional information
here.
Scanning System: 2 : 1 Interlace, PAL 50 Hz
vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p Composite Video 75
ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket, ~ 30 cm cable.
Horizontal Resolution: ~ 440 pixels (this value
is provided for comparative purposes only) Better than VHS * Near Super-VHS
resolution.
Minimum Illumination: ~ 0.5 lux @ F1.2, 5600º
Kelvin (this value is provided for comparative purposes only).
Spectral Sensitivity: ~ 400 to ~ 700 nm.
Automatic Electronic Shutter (AES): 1/50 to
1/120 000 second, 20 milliseconds to 8.33 microseconds, additional information here.
Signal to Noise ratio: 52 dB minimum,
typically 60 dB, measured with AGC Off.
Automatic Gain Control (AGC): Yes.
Back Light Compensation (BLC): Selectable via
Rear Panel switch.
White Balance Range: ATW / AWC (3200º ~ 10
000º Kelvin), selectable via Rear Panel switch.
Digital Zoom: 2 X, selectable via Rear Panel
switch.
Mirror Image: Selectable via Rear Panel
switch.
Power Requirements: 12 Volts DC Regulated, ~
100 milliamps, 2.1 x 5.5 mm DC socket, center pin = (+), ~ 30 cm cable.
Dimensions: ~ 38 mm Wide, ~ 38 mm High
(excluding Bracket), ~ 23 mm Deep, ~ 100 grams.
Made in Taiwan in an
ISO 9001 & ISO-14001 certified factory.
Manufacturer's Experience: 23 + Years.

Need Sound ? click here
Ancillary Products
Power-Up-Cable |
|||
Use your Browser "Back
Button" to return to previous page