Home Page |
|
Contact us |
![]() |
|
|
|
for
comprehensive specifications.
Video System: PAL Colour fully
compatible with Australian TV System.
Image Device: 795
(H) x 596 (V) 473 820 Pixel LOW BLEMISH
1/4" inch SONY Super HAD MicroLens Interline Transfer CCD
Sensor.
for:
Super HAD MicroLens information @ "SONY"
Scanning System: 2 : 1 Interlace, PAL 50 Hz
vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output (1): 1.14 V p-p Composite Video
75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket.
Video Output (2): S-Video (Y/C), Luminance 1 v
p-p 75 ohms, Chrominance 0.3 v p-p Burst 75 ohms, 4 pin Mini-DIN socket.
Lens: CANON Motorised Focus/Zoom/Iris, 22X
Optical ZOOM, F1.6 ~ F3.8, focal length 4 mm ~ 88 mm, Automatic Iris, Automatic
/ Manual Focus, 64 Zoom/Focus Positions.
Horizontal Resolution: ~ 700 pixels (this
value is provided for comparative purposes only) Better than Super-VHS
resolution.
Minimum Illumination: ~ 1.5 lux @ F1.2 (5600º
Kelvin), ~ 0.02 lux @ F1.2 (5600º Kelvin ) using Frame Integration (these
values are provided for comparative purposes only) ** Due to the nature of
Frame Integration clear images of moving objects may not be possible.
Automatic Electronic Shutter (AES): 1/50 to
1/100 000 second, 20 milliseconds to 10 microseconds.
Automatic Gain Control (AGC): 18 dB Max.
Signal to Noise ratio: Typically 52 dB,
minimum 48 dB, measured with AGC off.
Back-Light Compensation (BLC): 48 Zones.
White Balance: ATW / AWB / FIX.
White Balance Range: ATW 3200º ~ 9 600º
Kelvin. AWB/FIX 3200º Kelvin.
Negative Image: On / Off via OSD.
Power Requirements: 12 Volts DC Regulated, ~
300 milliamps, via two Screw Terminals.
Dimensions: ~ 59 mm Wide, ~ 80 mm High, ~ 120
mm Deep, ~ 450 grams.

Made by Taiwan's largest Camera maker in an ISO 9001 & ISO-14001 certified
factory.
Manufacturer's
Experience: 23 + Years.
for:
RS232 Interface Serial Protocol Info
Note: Access to
On-Screen-Display Set-Up menu is via four Push-Buttons on rear of Camera.
RS232C (Com 1) Serial connection
may be used together with "Camera Adj" application screenshot below
to access most functions.

Screen-Shot of Camera-Adjust
application. (Camera to Com 1 interconnection is via 2 wires + ground)

Remote Control & RS232C Com 1 Port
Wiring Diagram
Ancillary Products
Power-Up-Cable |
|||
Use your Browser "Back
Button" to return to previous page