 Security Camera |
|
 CCTV Security |
 pictured with optional Lens
|
|
One optional lens is available at above price when purchased 'with camera'. |
|
|
Video System: PAL Colour fully
compatible with Australian TV System.
Image Device:
752 (H) x 582 (V) 437 664 Pixel
LOW BLEMISH 1/3"
Sony EXview CCD - IMPORTANT Due to the highly sensitive
nature of this image sensor it may have more blemishes than ordinary sensors,
these imperfections may continue to appear after manufacture until the
photodiodes stabilise as the sensor ages, additional information
here.
for:
Super HAD MicroLens information @ "SONY"
for: EXview Image Sensor info @ "SONY"
Lens: C or CS Mount, Lens
is NOT SUPPLIED with this Camera,
compatible lenses are: C Mount (with
C-Spacer),
CS Mount, Fixed, Manual Iris & Auto Iris 1/3" & 1/2" types on
this page,
EXCEPT Cat Codes: CC21, CC25, CC21IRC, CC40,
CS25MI & CS25AIDC,
additional information
here.
Scanning System: 2 : 1 Interlace, PAL
50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Switchable, Internal
or Line Lock with Phase adjustment (24 vac operation).
Video Output (1): 1.14 v p-p Composite Video 75 ohms,
suit Australian TV, VCR, AV & Video inputs, BNC socket.
Video Output (2): Y/C Component Video (S-Video),
Luminance 1 v p-p 75 ohms, Chrominance 0.3 v p-p Burst 75 ohms, mini 4 pin
female socket.
Horizontal Resolution (Pixels): ~ 600
(Day mode - Colour) ~ 700 (Night mode - Mono), this value is provided for
comparative purposes only. Better than Super-VHS resolution.
Minimum Illumination: ~ 0.1 lux (Day -
Colour) ~ 0.01 lux (Night - Mono) @ F1.2, 3200º Kelvin with AGC = high, 10 IRE,
this value is provided for comparative purposes only.
Movable Infrared Optical Filter:
Switchable, Automatic/Manual, Day/Night level, Day/Night modes.
Mechanism
automatically positions optical filter between Lens & Image Sensor (Day mode) to
exclude Infrared radiation that would otherwise adversely affect colour
reproduction, this ensures colour rendition not possible
with ordinary non-filtered or notch-filter type Day/Night cameras.
Mechanism
automatically removes optical filter to allow Infrared radiation to pass in
monochrome (Night
mode) boosting low light and Infrared sensitivity, the result is significantly
better night images when used with an
Infrared Illuminator or Infrared rich light sources.
Infrared Response without Infrared
filter is ~ 700 to ~ 1100 nm
better than a
'notch'
filter,
additional information
here
Gamma: Switchable 0.45 or 1.
Automatic Electronic Shutter (AES):
1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds, Switchable On /
Off (Off = 20 ms for use with Automatic Iris Lenses), additional information
here.
Automatic Iris (AI) Lens Output:
Switchable, DC Drive or Video Drive suits all lenses in this catalogue, common 4
pin socket.
Manual
Electronic Shutter: Switchable, 1/50, 1/120, 1/250, 1/500, 1/1 000, 1/2 000, 1/4
000, 1/10 000.
Automatic Gain Control (AGC):
Switchable, normal 30dB, high 36dB.
Signal to Noise ratio: ~ 48 dB,
measured with AGC off.
Back-Light Compensation (BLC):
Switchable, On / Off.
White Balance: ATW dual range:
Switchable, 2 500º ~ 6 000º or 2 500º ~ 9 500º Kelvin .
Power Requirements: 12 Volts DC
Regulated ~ 350 mA (~ 800 mA Peak) or 24 volts ac ~ 10 Watts, via Screw Terminal
Block. Consider cable resistance when installing, ask us about solutions if
voltage drop is a problem with pre-existing wiring.
Dimensions: ~ 65 mm Wide, ~ 60 mm
High, ~ 140 mm Deep, ~ 380 grams.
Made in Taiwan in an ISO 9001
certified factory.
Manufacturer's Experience: 18 + Years.
Need Sound ? click
here
Ancillary Products
Power-Up-Cable |
|||